Waterproofing

WPU 1K

Single Component Moisture Curing Polyurethane Waterproofing System

Introduction

DESMOCRETE WPU1K is a single component moisture-curing polyurethane based liquid applied waterproofing system. When fully cured, it forms a seamless, tough, permanently flexible, UV stable waterproof membrane. DESMOCRETE WPU1K can be applied on most building material substrates including reinforced concrete, block/ brick works, cement render,plaster board and fiber reinforced cement. Properties like excellent bonding with concrete, high elasticity, good crack bridging ability and stability against stagnant water and corrosive chemicals allows effective waterproofing even in most demanding conditions. DESMOCRETE WPU1K offers cost effective waterproofing for some of the most challenging waterproofing conditions in a commercial building like podium gardens or swimming pools.

Key Features

• Liquid applied system - seamless membrane
• Single component – no weighing and mixing at site
• Easy application – by brush, roller or airless spray
• Highly elastic – good crack bridging ability
• Excellent adhesion over wide range of construction materials
• Resistant against plant root penetration
• Excellent resistance to oxidation, UV degradation and embrittlement

Application Area

• Water bodies like swimming pool, fountain
• Terrace garden and planters
• Podium level slab
• Basement from positive side
• Expansion joints

WPA 2K

Polymer modified Cementitious Membrane System for Waterproofing

Introduction

DESMOCRETE WPA-2K is a two component, polymer modified cementitious waterproofing product which can be used in conjunction with non-woven polyester fabric to form a seamless, high build and durable membrane. The time tested chemistry of the product, ease of application and cost-effectiveness makes DESMOCRETE WPA-2K a go-to product for the waterproofing of commercial and residential projects.

Key Features

• Water based system. No harmful volatile content. Safe to apply in confined places
• Optimum workable time. Easy to apply with good workmanship
• Excellent bonding with concrete and common masonry surfaces
• Resistant to ingress of water at high hydrostatic pressure

Application Area

• Wet area like bathroom, toilet etc
• Terrace, balcony, chhaja etc
• Podium level slab
• Basement from positive side
• Potable water tank

DPM

Ready to use Acrylic Waterproofing Compound

Introduction

Desmocrete DPM is a waterborne styrene acrylic copolymer based white pigmented compound, designed to be used as liquid applied waterproofing for outdoor applications. The dried film has low water absorption character along with good water repellant properties.

Key Features

• Ready to use product
• Water based system. No harmful volatile content
• Optimum workable time. Easy to apply with good workmanship
• Excellent bonding with concrete and common masonry surfaces
• Low dirt pick up and easy to clean
• Permeable to water vapour

Application Area

• Joint between RCC beam and brick work
• Terrace, balcony, chhaja etc
• Cement/ Asbestos Sheet
• External plaster

WPA-M

Polymer modified Trowel Applied Cementitious Membrane System for Waterproofing

Introduction

DESMOCRETE WPA-M is a two component, polymer modified cementitious waterproofing product which can be used in conjunction with glass fiber leno mesh to form a seamless, high build and durable membrane. The time tested chemistry of the product, ease of application and cost-effectiveness makes DESMOCRETE WPA-M a go-to product for the waterproofing of commercial and residential projects.

Key Features

• Water based system. No harmful volatile content. Safe to apply in confined places
• Optimum workable time. Easy to apply with good workmanship
• Excellent bonding with concrete and common masonry surfaces
• Resistant to ingress of water at high hydrostatic pressure

Application Area

• Wet area like bathroom, toilet etc
• Terrace, balcony, chhaja etc
• Podium level slab
• Basement from positive side
• Potable water tank

DPC

Polymer modified Cementitious Damp-proofing and Waterproofing Coating

Introduction

DESMOCRETE DPC is a two component, polymer modified cementitious coating comprising cement based composition, additives and high performance polymer. It provides a hydrophobic and breathable coating suitable for dampproofing and waterproofing of concrete, brick, masonry or cement-bound surfaces.

Key Features

• Hydrophobic and breathable coating. No bubbling or blistering in presence moisture
• Reduces efflorescence
• Water based system. No harmful volatile content. Safe to apply in confined places
• Optimum workable time. Easy to apply with good workmanship
• Excellent bonding with concrete and common masonry surfaces
• Resistant to ingress of water at high hydrostatic pressure
• Maintains concrete breathablity

Application Area

• General purpose waterproof and damp-proof coat for concrete, brick work, plaster etc.
• Resurfacing of bathroom walls exposed to dampness
• Basement and retaining wall from positive as well as negative side
• Potable water tank

Follow us on

© desmocrete.com, All Right Reserved.
Designed By HTML Codex